Bett 2026 Planning

Information and updates for delegation members at Bett UK 2026.

Your On-Site Team

First Step Advisors (the organizers of USA EdTech) will be on-site to support you as best we can. Find us if you need help and we’ll do our best!

Jim McVety
Managing Partner
Mobile/WhatsApp + 1 215-858-8820

Marla Wilson
Senior Partner
Mobile/WhatsApp + 1 858-342-9727

Stand Location & Set Up

STAND :: NC 60

  • WiFi Info
    Please note: We have limited capacity for WiFi, so this is ONLY for delegates. Please do not share with guests or visitors.

    • Network: usaedtech

    • Login: usaedtech

  • The USA EdTech Pavilion is a 48 square meter stand with four open sides.

  • We will have a welcome desk, center column with digital display, and kiosks along the perimeter.

  • Each kiosk will be branded with individual company logos and will include:

    • Monitor mounted on kiosk

    • Dedicated shelf space for laptop

    • Dedicated cabinet for storage

    • Electric outlet for laptop/phone
      (bring your own UK-compatible adapter)

  • Collateral: You will have space for limited collateral. We will be creating a centrally located card stand (specs to follow) for guests to browse, along with a small directory for visitors.

  • Below is a rough look at the placement within the North Hall.

  • Below is a bird’s eye view of the stand as well as a very rough rendering. The center column will be a deep blue and the welcome desks will match.

  • Eack Kiosk will be white so as to allow the logos for each co-exhibitor to stand out.

  • The center column has four sides, each with a digital display. We will rotate logos across these screens on an ongoing basis.

Stand Layout

  • Wireless keyboard mouse at each kiosk

  • Power outlet (remember to bring a UK adaptor)

  • Small storage for laptop (Additional storage in center column)

  • Additional portable charging batter in center column

Meeting Areas

  • There are four separate meeting areas for participating members, each with a table and two chairs.

  • Please limit your individual meeting times to 30 minutes and be considerate of fellow participants.

Registration

  • Reminder that you will need to have registered directly via your instance of Bett eZone.
    Co-exhibitors, your point of contact will receive an email from EXHIBITOR@bettshow.com to begin that process. If not, use that same email to submit an inquiry about team registration and Connect @ Bett access.

  • Importantly - you do not have to worry about logistics for the exhibit stand. We are handling.

Marketing

Pre-Event Marketing

  • We’ll be kicking off a steady stream of pre-event marketing on LinkedIn and via our new publication, Navigate EdTech. We will be talking up the USA EdTech presence and each of the partners and sponsors, in turn. As you’re able, we encourage you to like and share. 

  • NOTE: If you have any special promotions or campaigns that you are running for the event, please let us know. Be sure to tag @USAEdTech when you are promoting your Bett presence on LinkedIn and we will absolutely repost as an organization and individually.

On-site Videography Option

  • USA EdTech Coverage: We have paired up with an independent videographer based in London, Forto, who will be providing USA EdTech with services on the ground (interviews, highlights, b-roll).

  • Individual Member Option: Forto has offered to provide coverage on an individual basis for members at a highly discounted rate. You can engage directly with the owner (Email: Kit Whitaker) to secure your spot. Their offering includes: short interview, product demo capture and general event footage, edited into a 60-second film with same-day turnaround. Their standard rate is $1,400 but for our members the cost is $575.

Digital Display
We have a digital display that will feature the logos of sponsoring organizations in a rotation. We will also have all logos of participating companies on hand. So, if you would like your photo (or a team photo) in front of the USA EdTech stand with your logo on display, we can make that happen. Just tap one of our team members to arrange this while we are on site.

Canvassing

Exhibitors are reminded that handing out promotional materials or waylaying buyers in the gangways or public areas is prohibited. This includes car parks, catering facilities and entrances. Handing out of literature, samples etc., is only permitted within the confines of your stand.

Selling from Stands

Please note it is strictly forbidden for companies to sell products from their stands as the exhibition is trade only and selling directly from stands attracts the general public and also contravenes health and safety regulations.

Bett Show Schedule

Link to Bett Agenda

Exhibit Schedule (Subject to Change)

Monday 18 January
Co-exhibitor access to pavilion during build. However, we ask that you do not come to Excel center. The production team will be building the pavilion. You will be required to wear a safety vest. And there’s nothing to see, no storage available.
—
Tuesday 19 January
Co-exhibitor access to the pavilion during build. You can come if you like to get a lay of the land, we do not recommend it for everyone. The pavilion will be in final stages of build and. We cannot guarantee that you will have be able to store materials overnight

—

Wednesday 20 January

  • 8:00 am
    Hall is open to Co-exhibiting companies only. We recommend arriving at least by 8:30 am toconnect your laptops and get a lay of the land.

  • 8:30 am
    Arena opens. This is a busy time when attendees arrive for badges and begin occupying the main corridor.

  • 9:30 am
    Exhibition floor opens
    At this time, Sponsoring Companies can enter the floor (as yours is a standard (non-exhibitor) registration.

  • 18:00 (6:00 pm)
    Show floor closes.

—

Thursday 21 January

  • 8:00 am
    Hall is open to Co-exhibiting companies only. We recommend arriving at least by 8:30 am toconnect your laptops and get a lay of the land.

  • 8:45 am
    Arena opens. This is a busy time when attendees arrive for badges and begin occupying the main corridor.

  • 9:30 am
    Exhibition floor opens
    At this time, Sponsoring Companies can enter the floor (as yours is a standard (non-exhibitor) registration.

    —

  • USA EdTech Happy Hour at 16:30 (4:30 pm).

    • 16:00 - 16:30 (4:00 - 4:30 pm) Catering will arrive with beverages, bins, and ice,

    • We will begin placing these around the pavilion, including at meeting tables, the pavilion welcome desk, and (if you’re amenable) on exhibiting kiosks.

    • New this year, our Happy Hour sponsors will have the opportunity to address the crowd after welcome remarks from the USA EdTech Stand organizers.

    • Happy hour will run until 18:00 (close of show).

    —

  • 18:00 (6:00 pm)
    Show floor closes.

—

Friday 23 January

  • 8:00 am
    Hall is open to Co-exhibiting companies only. We recommend arriving at least by 8:30 am toconnect your laptops and get a lay of the land.

  • 8:45 am
    Arena opens. This is a busy time when attendees arrive for badges and begin occupying the main corridor.

  • 9:30 am
    Exhibition floor opens
    At this time, Sponsoring Companies can enter the floor (as yours is a standard (non-exhibitor) registration.

  • 17:00 (5:00 pm)
    Show floor closes. Note that the show floor starts to empty out around 3 pm on Friday, if not a little sooner.

Lead Scanning and Connect @ Bett Info Session

  • Lead Scanning

    • For companies opting into Lead Scanning and the Connect at Bett Platform, you will be able to activate your instance via the link provide by Bett (in December).

    • Bett Video for reference.

    • The platform to set up lead scanning is the same platform as the one you've been using to register your team, Visit by GES. To get started, please go to the ezone and select 'exhibitor registration'. This will take you to the main platform where you will be able to register your colleagues, edit their permission to be able to use the lead scanning tool, and eventually see all your scanned leads.

      For a quick to-do list on how to prepare for use of the lead scanning tool onsite, see below:

      • Download the app or access on web browser - different set up instructions are here. 

      • Add team members - Visit by GES allows you to register your team for the event and grant them permissions to view, make and manage connections, and you can also grant some of the members admin permissions so they can also manage the team. If you've already added team members, you can edit their permissions by hovering over their name, selecting the pencil icon, and selecting/unselecting the tick boxes under 'Permissions' in the pop-up.

        • 'Allow to make connections' means that person can access the lead capture platform, 

        • 'Admin permissions' means they can edit roles of individuals the same way you currently can as an admin

        • 'Show all connections' means they can see all the leads captured by your staff at the show, 

        • 'Allow export connections' means they can export leads captured

      • Add questions - Set up the questions in the Visit Connect app before the event, so your team members can collect the answers while making connections. This will help you streamline the follow-up process and remember who was who!

      Onsite, while scanning connections, the app will continue to operate if you don't have internet connection. However, the scan information won't sync data to the portal without a connection. You must ensure devices connect to wifi in order for all of the leads to be synced across to your Visit by GES account.

  • Connect at Bett

    • Link to guidelines from Bett (From 2026 - these will be updated!) on how to utilize the platform. They will not be hosting an information session as the guidelines are pretty straightforward. But if you need support, please let us know.

Delegation Visits and Special Events

We are working on delegation visits from educator organizations, school groups, and country-wide delegations. Bett has a curated option for 15 minute visits from selected country delegations, but the fee is $6,500 per 15 minute visit so we don’t feel the ROI opportunity exists to encourage members to participate.

NETWORKING EVENTS

SHINE —Shaping Her Impact ‍Networking Event
An evening for women professionals focused on growth, leadership, and meaningful connection.

  • When & Where Details TBD, but typically on the Sunday before Bett.

  • Details: Kate Lee Carey of Cooley LLP, a USA EdTech Delegation Member, is organizing a Women in EdTech Social on Monday, 19 January. Please Email Kate directly for details.

—

Celebrating women in EdTech: A networking event at Bett

  • When & Where: 21 January, 17:30 - 19:30, Tech in Action Theatre

  • Details: Bett is hosting this networking event for founders, educators, consultants, or any one of the various different roles in the EdTech community, everyone is welcome!

—

EdTech Dogs: An informal networking social for members of the edtech community.

  • When: Typically on Wednesday of Bett at the Fox Excel Pub (adjacent to Excel London). Details TBD.

  • Details: The DOGS are an all-inclusive, education industry networking group. DOGS participants include Edtech executives, district leaders, VC & Private Equity folks, Edtech Press and other thought leaders. They gather at many of the industry conferences with the goals of fostering informal networking, industry collaboration and having fun. DOGS is not a sponsored event. Attendees buy their own drinks and drinks for their friends.

—

NOTE: If you have an event (dinner, social gathering), please email Jim McVety and we will post here and share with the group.

Travel Guidance

Friendly reminder that you are solely responsible for your travel to/from the UK and locally, and for all lodging.

  • Important Reminder: the UK requires every visitor to have an Electronic Travel Authorization. We recommend downloading the app and going through the application process as early as possible. It takes a few minutes to complete and is usually approved within minutes. However, it can take several days.

  • Bett’s Travel Information: Click here.

  • Bett’s discounted hotels: Click here.
    Note that many folks choose to stay in other parts of London.

    • We like to recommend hotels near the Tower of London for access to the DLR (above ground light rail that goes to Excel London) or near Liverpool Street Station (Elizabeth Line underground that goes directly to Excel London). These areas have a little more happening at night than what you would find near the excel center.

  • Local travel - we use the Elizabeth Line or the DLR (above ground light rail) to get to/from the Excel Center.

  • Airport travel - we recommend using the Elizabeth Line for transport from Heathrlow to London, though both Heathrow and Gatwick airports have Express trains.